Location for Mopar Side Mirror
Click on the image for a full version.The printout version is a big file and will take a while to download.
Then print the files, combine the pages and use the printout as a pattern template to install a mirror on your Mopar!
IMPORTANT NOTICE!
Double check the dimensions and spacing before drilling holes for the screws that hold the mirror to the car.
Make sure the pattern holes match the hole spacing for the mirror you are using.
If not, adjust the spacing accordingly BEFORE you drill!
Thanks to Bob F. for the heads up on the mirror screw spacing!
 1963-1965 Plymouth-Dodge, part 1 |
 1963-1965 Plymouth-Dodge, part 2 |
 1963-1965 Valiant Dart, part 1 |
 1963-1965 Valiant Dart part 2 |
 1965 Plymouth Fury & Sport Fury |
 1965 Dodge Polara and Monaco |
 1962-1964 Dodge 880, part 1 |
 1962-1964 Dodge 880, part 2 |
 Simca, 1962 Plymouth and Dodge (except Custom 880), '60-'62 Lancer and Valiant) |
 1965 Chrysler |
Special thanks Dave Orr to for supplying the documents!
Dave writes: "To be safe I have added measurements to all documents and match lines.
Those that use the printout will have to check how their printer prints out
and adjust the percentage to make it match the true measurement."
Dave writes: "To be safe I have added measurements to all documents and match lines.
Those that use the printout will have to check how their printer prints out
and adjust the percentage to make it match the true measurement."
DRAFT Posted: December 3, 2003
Revised: May 23, 2005