check thickness of port walls etc.
The colour code is blue for water
jacket, silver for the head gasket
face, black for combustion chamber,
red for exhaust ports and exhaust
crossover tract, yellow for inlet port.
| Ray writes:
Ben has chopped up a head to check thickness of port walls etc. The colour code is blue for water jacket, silver for the head gasket face, black for combustion chamber, red for exhaust ports and exhaust crossover tract, yellow for inlet port. |
|
|
|
 |
An 'above and below' view of a horizontal slice across the inlet port and crossover, with a head stud stuck in the middle of the crossover. One pic is the layout of how the cuts were done... |
 |
| And here's a busted block and crank among our rummagings.... |  |
 |
| Page Posted - May 2005 | Page Posted - May 2005 |
| Page Posted - July 24, 2005 | Page Posted - December 1, 2005 |